30" Grab Bars | Bobrick B-6806 Series

✅ 30" (762 mm) length with 1-1/2" (38 mm) diameter tubing

✅ Constructed of 18-gauge (1.2 mm) Type 304 stainless steel with peened finish

✅ Peened texture provides enhanced grip for wet-hand applications

✅ Concealed mounting flange made from 1/8" (3 mm) thick Type 304 stainless steel

✅ Flange size: 2" W × 3-1/8" H (50 × 80 mm) with screw holes for concealed anchors

✅ Snap-on flange cover made of 22-gauge (0.8 mm) stainless steel

✅ 3-1/4" (85 mm) diameter cover fully conceals mounting hardware

✅ 900 lb (408 kg) load rating — exceeds ADA structural requirements

✅ ADA compliant — meets §609.2 graspability and §609.3 wall clearance

✅ Made in USA

Why Choose the B-6806.99x30?

ADA Standards §604.5 require grab bars in every accessible toilet stall, and §608.3 covers accessible shower compartments — making them a code requirement in virtually every commercial, healthcare, and institutional facility. The Bobrick B-6806.99x30 is the peened-finish, 30-inch variant of Bobrick's most widely specified concealed-mount grab bar series. At 30" (762 mm), it bridges the gap between standard shower bar lengths and full toilet stall requirements — ideal for shower side walls and custom ADA layouts where the peened texture provides essential wet-hand grip. The peened texture creates a tactile surface that significantly improves grip when hands are wet or soapy — the preferred finish for showers, aquatic facilities, pool locker rooms, and wet-area applications. As a Bobrick Premier Partner, TotalRestroom.com carries the full B-6806 line with a Low Price Guarantee and 48-Hour QuickShip on stocked sizes.

Key Features & Applications

• Mid-Length Peened Bar for Showers and Custom Layouts: At 30" (762 mm), this bar bridges the gap between standard shower bar lengths and full toilet stall requirements — used for shower side walls, transfer shower applications, and custom ADA layouts where a 24" bar is too short but a 36" bar won't fit. The peened finish is especially suited for shower environments. Note: ADA §604.5.2 requires a minimum 36" rear-wall bar for standard accessible toilet stalls.

• 900-lb Load Rating with Concealed Mounting: Exceeds ADA structural stress requirements, supporting up to 900 lbs (408 kg) of downward load when anchored into proper structural backing. Snap-on flange covers fully conceal mounting hardware for a clean, professional appearance with no exposed fasteners.

• Type 304 Stainless — Built for Commercial Cleaning: The 18-gauge Type 304 stainless steel core resists corrosion and stands up to commercial-grade disinfectants, bleach solutions, and hospital-grade cleaners. The peened texture does not trap bacteria and cleans easily with standard commercial cleaning protocols.

• USA Manufacturing and Long-Term Parts Availability: Bobrick manufactures the B-6806 series domestically, ensuring consistent quality and reliable lead times. Replacement flanges and mounting hardware are stocked separately — built to be serviceable for the life of the facility.

Peened vs. Satin — Which Finish Do You Need?

The B-6806.99x30 (peened) is specified for showers, pool facilities, locker rooms, aquatic centers, rehabilitation facilities, and any wet-area application where users regularly have wet or soapy hands. The textured surface provides meaningfully better grip in these conditions.

The B-6806x30 (satin) is the standard choice for dry commercial restrooms, offices, and healthcare corridors where appearance is a priority. Both versions are identical in diameter, gauge, load rating, and mounting system.

Frequently Asked Questions

• Does this grab bar come with mounting hardware? No — mounting hardware is not included because wall construction varies widely (concrete block, steel stud, wood framing, tile backer). We recommend #14 sheet metal screws or 1/4" wood screws into structural backing rated for 250 lbs minimum — never into drywall alone.

• What does "peened" mean on a grab bar? Peened refers to a surface treatment that creates a textured, dimpled finish on the stainless steel. This texture provides significantly better grip than a smooth satin finish when hands are wet or soapy — making it the preferred specification for showers, pool facilities, and wet-area applications. The structural specs are identical to the satin version.

• Can I use a 30" peened grab bar for an ADA toilet stall rear wall? No — ADA §604.5.2 requires the rear-wall bar in a standard accessible toilet stall to be at least 36" long. A 30" bar is used for shower applications or supplemental positions. The peened finish makes this bar particularly well-suited for wet shower environments.

• Is the B-6806.99x30 ADA compliant? Yes. The 1-1/2" diameter meets ADA §609.2 graspability requirements, and the 1-1/2" wall clearance meets §609.3. When installed at correct mounting heights per §604.5 or §608.3, this bar satisfies ADA Standards for Accessible Design. Note: ADA Standards do not require grab bars to have peened or textured surfaces — peened finish is a specification choice, not a code requirement.

• Can this bar be mounted horizontally, vertically, or at an angle? Yes — the B-6806.99 can be installed in any orientation. ADA §604.5 specifies horizontal bars for toilet applications; §608.3 covers shower orientations. Verify the required orientation with your applicable building code before installation.

30" (762 mm) straight grab bar with a 1-1/2" (38 mm) diameter, constructed from heavy-duty 18-gauge (1.2 mm) Type 304 stainless steel with peened finish for enhanced wet-hand grip. Features concealed mounting flanges with snap-on covers for a clean, professional appearance. View the full Bobrick B-6806 series for all available lengths and finishes.